Factory Resetting Your Computer's (BIOS) settings and return it to the default as usual.......

Sometimes our computer crashes or changes in the BIOS settings. Whenever we want, the BIOS settings are as default as before, and we can bring them back again.

In this tutorial, I will show you how the BIOS settings are brought to factory defaults in three ways.

Restore from the BIOS menu

The simplest method is the topics below.

First step

The keyboard is in the middle of the window

Keep pressing the DEL, F1 or F2 buttons, the BIOS menu will come. There are differences between different brands of F1 or F2 buttons. However, if you notice a computer, you have pressed the button for the BIOS settings.

Second step

When you enter the BIOS settings, you can go to the EXIT menu.

Third Step

With the arrow arrow on the keyboard, select Load Setup Default.

Shown the picture in In But it can also be different different brands But if you notice a o bit, then the Load Default of the Setup may be different.

Fourth step

Now you can confirm by pressing the ENTER button. In the meantime, you have the option of selecting Y's Y and NO buttons. If you press YES Y, then select Exit EXIT & SAVE CHANGES by
enter pressing it becomes a mistake!

Moderate CLR CMOS jumper at MOTHER BOARD

If you can not access the BIOS, then you can adopt this method
Turn the computer off and open the caching and keep an eye on the motherboard. In the picture below, the red circular object is the CLR CMOS jumper open it, open pins 1-2 from pins to 2-3. After 10 seconds, put the pins like 1-2 on the back. Open the battery from MOTHER BOARD

If you can not find CLR CMOS jumper, follow this procedure. The Remove the battery to The It will be easily seen because it looks like a familiar clock battery, a little bigger am am See the picture below.
Please wait again  for the battery your  back is the BIOS in  With the help of one of the above three methods, the BIOS in the settings back to factory defaults.